Rolled Trommell Screens
Plasma cut and rolled in-house. Apprx.
62" x 132" x 3/8" A36 plt. Rolled to 7ft
diameter. Developed from customer supplied sample. - See
The Photos |
 |
Pit Covers - Round &
Rectangular
Plasma cut, fabricated and drilled
in-house. Made from 1/2" A36 tread plt and purchased
parts. - See The Photos |
 |
|
Subbase Frame & Support
All cutting, fabricating & machining
done in-house. - See The
Photos |
 |
Frames
Oxy-fuel cut and and machined in-house.
Fabricated from purchased and customer supplied parts. - See The
Photos |
 |
|
Chain Yokes
Plasma cut, fabricated & machined in-house.
Machining addes Apprx. 15.5" x 3.75" x 3" A36
plt. Developed from customer supplied sample. - See The
Photos |
 |
Aluminum Idler Rolls
Fabricated & machined from 6061
aluminum in-house; provided to the customer, balanced.
Multiple sizes developed from customer supplied samples. - See The
Photos |
 |
|
Subbase & Tooling Racks
Subbase
fabricated from 3/8" & 3/4" A36 plate and
1.25" x 4 A36 flat bar. Part is waiting for final
machining. Tooling rack
fabricated from 2" x 2" x 1/4" A36 angle &
1/4" plate. Delivered to customer within narrow delivery
dates. - See
The Photos |
 |
Air Fluidizing Material Conveyors
Fabricated from A36 material and
purchased parts. Assembled, painted and palletized in-house.
Inspected by customer representative and shipped from Logue
Industries by common carrier to end user. - See
The Photos |
 |
|
Railroad Tie Grinder Grates
Oxy-fuel cut from A36 & AR400
plate. Beveled and ground to ensure proper weld penetration.
Parts are waiting for final assembly and welding. Multiple grate sets will be provided to
the customer over the course of the year as machinery
consumable parts. - See
The Photos |
 |
Two Pump & Impeller Subbases
Fabricated from MC18x58#, MC12x50# and
MC13x50# channel; 0.375" to 3.75" plate. All
material A36. Majority of the welds were 3/8" fillets. Approximate
overall size 18'-4"x 7'-0" x 3'-4". Provided to
the customer machined complete.- See
The Photos |
 |
|
Slurry Pump Test Tower
Fabricated from 8"x 8" x 1/4'
tube steel, W18" x 24# beams, 3/8" and 1 1/2"
A36 plate. Assembled in-house and disassembled for shipment to
be installed on site by Logue Industries, Inc. Approximate
overall size 14'-8" x 16'-8" by 18'-0" tall. - See
The Photos |
 |
200 Ton Press (For our shop.)
Fabricated from 18 x 58# and 12 x 50# MC
Channel and 1", 3/4" and 5/8" plate. The ram
support assembly rides on bearing for easy location and use.
Overall size 9'-4" tall x 1'-6" deep x
5'-0"wide. - See
The Photo |
 |
|
Tube Sheet Supports
Over 2500 pieces plasma cut from customers
material for 700 assemblies of 310 SS material. Delivered to
customer's boiler location in partial quantities to facilitate
shutdown requirements. All heat numbers were tracked across
multiple plate thickness per each assembly. - See
The Photos |
 |
Wall Boxes
24 assemblies from
A36 material delivered in partial quantities to customer
location facilitated refractory installation to meet field
deadlines. Heat number tracibility on all material maintained.
- See
The Photos |
 |
|
Dump Truck Chassis & Box Modifications
Multiple trucks and boxes were
disassembled and reassembled to provide one dump truck to
customers specifications. - See
The Photos |
 |
Stainless Flat Bar Sheared Punched
and Formed
Large Quantity Requiring Quick Turn Around
Approximately 1880LF
of 304L stainless flat bar requiring
heat number tracibility and individual piece
numbering of over 2400pcs. Delivery was critical
because of a double boiler outage. - See
The Photos |
 |
|
Discharge & Column Pipes
Two each stainless column
and discharge pipes. An A36 column column pipe Approximately 50" long and 10sch 40 pipe. Both
pieces custom fabricated and machined for the
heavy slurry pump industry .- See The Photos |
 |
Dump Box
Approximately 8ft wide x
10ft long x ft high. Sheared, formed and
fabricated from 10ga sheet in-house. Customized
to fit older model dump truck and scissor lift
mechanism. - See The Photos |
 |
|
Inlet Form
Approximately 3ftwide x 5ft
long x 2ft tall. Sheared, formed on our 230ton
press brake, punched, fabricated and assembled in
house. - See The Photos |
 |
Pump Casing Tank
Approximately 2ft wide x 3ft long
x 1ft high. Formed, plasma & oxy-fuel cut
from a variety of plate sizes to accommodate machining. Machined in-house on our Mazak machining
centers. Painted as required by the customer.
Updated: 043001 - See The
Photos |
 |
|
96in Tank Up Stand
Approximately 8ft wide x
12ft long x 7ft high. All plates oxy-fuel cut in-house.
Machining also done in-house. Welding and
assembly of purchased parts and revisions cared
for in-house. Metal required ranged from 1 inch
plus plate to sheet metal to TGP round bar. (This
is the third 96in Take Up Stand we have built in
the last approximately two years.) Updated 043001 - See
The Photos |
 |
Cable Payoff Stand
Approximately 8ft wide
and 11ft long. Sheared, plasma cut, to dimensions.
Parts welded to assembly drawings. Milled,
drilled, assembled and tested for shut down
delivery date, Dec 24, 2000. - See The
Photos |
 |
|
Scallops, Wall Boxes, Formed Plates
Approximately 2000pcs. 10ga,
12ga, 3/16", 1/4", 3/8", 1/2"
plate. SA387, SA516, M1015, A176, M569, CorTen,
410 Stainless material. Sheared, plasma cut,
press brake formed, welded to dimensions.
Multiple delivery dates with partial quantities;
heat number and inspection tracibility on all pieces. - See The Photos & More Photos |
 |
Five A53 11ft Column Pipes.
Approximately 11ft long
and 30in diameter. Gussets and rings burned in
house. Fabricated, welded and inspected to AWS D1.1-2000.
ID of pipe to flange 3/8" fillet and OD of
pipe and gussets 1/2" fillet. - See
The Photos |
 |
|
316L Stainless pump frames.
Eight assemblies. Approximately 48x55x35.
Fabricated from various thickness of plate (1.25,
1.125, 0.5, 0.25). All plates, and shapes
programmed, burned, fabricated and welded in
house. Delivery by our trucks. - See
The Photos
|
 |
Header Hanger Lugs
Oxy-fuel cut and and machined in-house.
Apprx. 8.5" x 13" x 1.75" SA516Gr70 plt.
Supplied to customer with heat number tracking and split delivery dates.
-
See The Photos |
 |
| Items
chosen to be showcased here will endeavor to reflect our
shops welding and machining capabilities. |
